Fix Critical Process Died in Windows 10 Error

Are you getting an error code “Critical Process Died” on your Windows PC? Try to recall, if you recently upgraded your Windows or installed the latest Windows operating system on your computer. Many Windows 10 users are facing trouble accessing their PCs due to the Blue Screen Of Death Error “Critical Process Died”.

The Windows 10 Blue Screen Critical Process Died error appears when one of your system’s critical programs can’t run or execute properly. This results in the blue screen of death errors on your device that disappears after a restart. In some devices, the system goes in a restart loop within every 1 hour once this error code shows up.

critical process died

In most cases, this Windows Stop Code Critical Process Died error occurred after the users upgraded their Windows 10. If you are also getting annoyed with this error on your PC, then get help from this post and fix this problem without any fail.

How To Fix Critical Process Died Error

Critical_Process_Died is a fatal error that can leave your system programs do not work efficiently. Therefore, it has to be fixed as soon as possible to retrieve your device back in a normal state. Below are some of the most useful solutions for fixing Critical Process Died error.

Restart PC in Safe Mode

Even after restarting the computer, the error doesn’t show any signs of leaving from the screen. Therefore, you have to restart your computer in safe mode. To do so, follow the steps given below.

  • Restart your computer as usual.
  • Before the system starts loading, press Shift+F8.
  • The system will start in recovery mode now.

critical process died error

  • Here, go to the “Advanced Boot Options”.
  • Select the boot mode as “Safe mode”.
  • That’s it.

Run System File Checker

The SFC(System File Checker) scan on your Windows PC is one of the most helpful programs. This program will run a scan for all the system files and identifies the corrupted or infected files and places them in a folder. Therefore, in order to fix the Critical Process Died issue, run an SFC scan.

  • Go to the search bar on your desktop and type command prompt.
  • Now, from the results, click on “Run as administrator” under “Command Prompt”.
  • Once in the Command Prompt, type “sfc/scannow” and press Enter.

windows stop code critical process died

  • The scan will begin. Wait for the scan to complete successfully.
  • If there are no corrupted files on your PC, a message as shown here will appear.
  • Finally, restart your computer and check if the blue screen of death error is gone.

Update System Drivers

Make sure that the system drivers on your computer are updated. You can manually update the drivers of your computer by following the steps given below.

  • Press Windows+I keys to go to the Settings page.
  • Now, click on the “Update & Security” option.
  • Next, select “Windows Update” from the left pane.

critical process died error in windows 10

  • Click on the “Download” button to install the latest drivers.
  • You can also install the optional updates present here.
  • In case of using any third-party graphics card, update them.
  • Once done, restart your PC to apply the changes.

Check Disk Errors

Similar to an SFC scan, a disk error scan can also fix the Critical Process Died error easily. To check the disk errors in the Command Prompt, follow the instructions given below.

  • Open Command Prompt as an administrator firstly.
  • Now, type “chkdsk C: /f” and press Enter.

critical process error

  • In place of “C”, you can type the disk drive name that you want to check.
  • Once done, restart your PC.
  • Check if the error still persists.


If you are still not able to get rid of the Critical Process Died error in Windows 10 PC, you can run a DISM scan. This executable program checks the files and repairs them without any involvement from you. To run a DISM scan, do this:

  • Go to the search bar on your desktop and type command prompt.
  • Now, from the results, click on “Run as administrator” under “Command Prompt”.


  • Once in the command prompt, type the below commands one by one and press Enter.
    • Dism /Online /Cleanup-Image /CheckHealth
    • Dism /Online /Cleanup-Image /ScanHealth
    • Dism /Online /Cleanup-Image /RestoreHealth
  • Once done running the commands, exit the window and restart the PC.
  • Hopefully, the Critical Process Died error will be fixed this time.

Clean Boot The Device

Clean booting your computer is another effective method to fix Blue Screen of Death Critical Process Died error. A clean boot will restart your computer with a minimal set of drivers that are sufficient enough to perform basic programs. This clean booting will also help in fixing the error codes.

  • On your computer, press Windows+R keys to open the Run box.
  • Type “MSConfig” in the box and click on “OK”.
  • Now, you will be redirected to the System Configuration window.

fix blue screen of death critical process died

  • Next, check the option for “Diagnostic Startup” and click “OK”.
  • The system will automatically reboot with minimum drivers.
  • Once restarted, you can start the drivers individually in Services.

Uninstall  Windows Update

Most of the users got the Critical Process Died error on their computer after installing the latest Windows 10 updates. If you have also upgraded your Windows, then try uninstalling the latest updated software and get back to your outdated one. This has worked for most users, so give it a try.

  • Press Windows+I keys to open the Windows Settings page.
  • Now, click on the “Update & Security” option and open it.
  • Next, select the “Windows Update” tab from the left pane.

how to fix critical process died

  • Come back to the main page and click on “Update History”.
  • Then, under Update History, select the “Uninstall Updates” option.

windows 10 blue screen critical process died

  • The Uninstall Updates page will be opened now.
  • Select the update you want to delete and click on “Uninstall”.


  • Finally, reboot your computer and see if the error is fixed.

Run System Restore

If none of the above methods are fixing your problem and you are still getting the Blue Screen Of Death error Critical Process Died, then restore your system back to its previous configuration. Users who are getting the error after updating Windows OS can use this fix.

  • Go to the search bar on your Windows 10 and type “create a restore point”.
  • Open the Create a restore point from the search results.
  • Now, you will be taken to the system properties window.
  • Make sure to switch to the “System Protection” tab.

critical process died error message

  • Next, click on the “System Restore” button and click OK.
  • Follow the on-page instructions and finish the restore.
  • Once done, restart your PC.

This method will most surely fix the Critical Process Died error on your Windows 10.

Other Similar Articles To Check:


Critical Process Died error occurs when the operating system faces an issue while executing any process. This error can be fixed by performing the solutions listed in this post. If you got this error after updating Windows, you can install the updates as well. We hope you found this article helpful. For more useful guides, visit the Kinetic HiFi website.

Leave a Reply